Troubleshooting - PROZIS JET Manual Del Usuario

a minimum thickness of 3 cm must be placed between the fan and the metal
surface.
3. Angle adjustment.
The fan can operate in stationary mode or in an adjusted tilt angle: 2º; 18º
back. To adjust the tilt, grasp the fan motor shell and gently push forward or
backward. To keep it stationary, just keep it at a vertical angle.

TROUBLESHOOTING

Some issues that may arise can be solved by the user. If the problem persists
after having tried the following solutions, please contact Prozis customer
service.
manual-jet.indd 7
PROBLEM
The fan does not work.
CAUSE
The power cord is not
plugged into the device
and/or into the power
outlet.
Power source is not
turned on.
You didn't touch the
aluminum alloy stand to
turn on the device.
SOLUTION
Carefully plug the USB
adapter into the fan and
into power outlet.
Connect the fan into a
different power source.
Touch the aluminum alloy
stand to turn on the device.
EN
7
2019-04-24 17:40