Tumi 14396 Manual Del Usuario página 4

4) playBack when connecTeD via BlueTooTh:
using the appropriate controls, push the corresponding button:
Select music to play in Bluetooth device
•
Press for Play / Pause
•
Press for next song
•
Press for previous song
•
Press or to adjust volume level or adjust it from your Bluetooth device
•
Press and hold key until logo light turns off
•
5) Taking callS on an iphone
When you receive an incoming call, an alert will sound from the Tumi Travel Speaker. if you are listening to
music from your iPhone, the music will automatically pause.
To accept a call: you can accept a call as you usually do; using your iPhone controls or press the "Play/
Pause" button . Speak normally. your call will come through the speakers and your voice will be picked
up through the built-in microphone.
To end a call: use your iPhone controls or press the "Play/Pause" button
To reject a call: use your iPhone controls or press and hold the "Play/Pause" button
To use call waiting: use you iPhone controls or press and release the "Play/Pause" button
succession to put the first call on hold and answer the incoming call. Repeat to switch back to the first call.
6) pairing wiTh TruewireleSS
For the ultimate sound quality, it is recommended that you have two speakers to pair with TrueWireless.
The following directions are based on using two speakers.
Turn on Speaker 1; a Blue LEd will light
•
Enter into "normal Pair" mode by pressing the Power button "
•
in "normal Pair" mode
Speaker 1 is now paired with your phone
•
Turn on Speaker 2; a Blue LEd will light
•
Put both Speakers 1 and 2 into "Partner Pair" mode by pressing "Power
•
together; Red and Blue LEds will light momentarily
Put speakers close to each other. Wait until a red LEd lights in each. An indicator signal will then sound
•
from both speakers
connect your phone with Speaker 1 by selecting "Speaker 1" from the Bluetooth device List on your
•
phone
The TrueWireless System is now in place. Both speakers will play music (right and left channels)
•
simultaneously; Speaker 1 will flash red and Speaker 2 will be solid Red
just as you would to accept a call.
.
twice in
"; Red; Blue LEd lights will flash while
+ Vol up " buttons
7) SpeciFicaTionS
Total 6W output (3W / channel)
•
Full-range (35mm) driver / channel + Passive Radiator
•
distortion <= 10 %
•
S/n ratio: >75dB@1W
•
Frequency Response: 200hz – 15k hz
•
Li—polymer Batt: 700mAh
•
Playtime: 4hours in 80% Volume
•
Recharging Time: 2hours
•
(optional) Power Adaptor: 5Vdc @ 700Ma
•
8) coMpaTiBiliTy (BlueTooTh Device)
wireless: devices with Bluetooth 2.0 or for profiles such as iPad, iPhone (2nd gen and newer with
•
iPhone software 3.1), iPod touch (2nd gen and newer with iPhone software 3.1) and Bluetooth-
equipped Macs and most Bluetooth-equipped smartphones or computers
wired: connects to any device with a headphone port via 3.5 mm mini-jack cable
•
9) TrouBleShooTing
*check Tumi Travel Speaker or Bluetooth device
volume level
Sound is very low or no sound
*if using 3.5mm port, be sure the mini jack cable is securely
inserted into the Tumi Travel Speaker and your device
Sound not in stereo when playing
*Make sure the sound output is set on your headphones
music
*Make sure your Bluetooth device has A2dP
Music is playing on the device but
*Be sure the device is paired
isn't transferring to the Tumi Travel
Speaker
*if using 3.5mm port, be sure the mini jack cable is securely
inserted into the Tumi Travel Speaker and your device.
*Make sure Tumi Travel Speaker main switch is on
LEd light not on
*Make sure Tumi Travel Speaker is charged
*Make sure your mobile device is hSP/hFP
hands-free calling is not working
*Be sure your iPhone or mobile phone is paired
with iPhone or mobile phone
*check volumne on Tumi Travel Speaker
Music is not resuming after hanging
*Press play to resume music
up a call