Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
VSky H3970 Quick Start Guide
Configure SATA Settings
Finally, you must enable Hot Plugging for the two system disks and enable a RAID1
configuration for system drive redundancy.
1.
Use the arrow keys to select Advanced and press <Enter> to enter the Advanced menu.
2.
Select SATA configuration and press <Enter>.
3.
Select SATA Mode and press <Enter>.
4.
Choose the RAID Mode option.
5.
Select Port 0 Hot Plug and choose the Enabled option.
6.
Select Port 1 Hot Plug and choose the Enabled option.
7.
Press <F4> to Save and Exit. This will save the BIOS settings changes and reboot the
controller
Boot Configuration menu
17
Promise Technology, Inc.
Publicidad
Capítulos
Tabla de contenido
