Motostar BATTSTAR Guia De Inicio Rapido página 5

BA BA TTST TTST AR AR
BA BATTST BA TTST TTSTAR AR AR
BA BA BA BA BATTER TTER TTER TTERY Y Y Y Y CHARGER TTER CHARGER CHARGER CHARGER CHARGER
Battery-powered power board for
STYLSTAR, ECLISTAR and
DOMUSTAR automation systems.
It is automatically activated during
power outages. When the mains power
is restored, it recharges the batteries.
MOUNTING DESCRIPTION ON THE XB100 CONTROL MOUNTING DESCRIPTION ON THE XB100 CONTROL MOUNTING DESCRIPTION ON THE XB100 CONTROL P P P P PANEL
MOUNTING DESCRIPTION ON THE XB100 CONTROL MOUNTING DESCRIPTION ON THE XB100 CONTROL
1) Disconnect the system from the mains
power. Open the control lid (1) and remove
the battery support bracket (2).
1
Battery support
bracket
2
4) Remove the terminal boards connecting
the transformer to the control board (1) and
inser t them in the free slots of the
"BATTSTAR" board (2).
1
FA FC F FA FC F
FA FC F FA FC F FC FC FA FA FC FC FA FA
VEL1 RALL1 COM1 VEL2 RALL2
2
VEL1 RALL1 COM1
VEL1 RALL1 COM1 VEL2 RALL2 COM2
M6 M6
LINE FUSE 1A
Terminal
Transformer
boards
terminal board
socket
UNI6954 ø2,9x9,5
n°2 self-tapping screws
UNI7687 M3x6 n°2 screws
N°2 batterias
(12V-1,2Ah)
_
2) Position and fasten the "BATTSTAR" board
on the spacers placed on the control board
with the UNI 7687 M3 x 6 screws provided.
Control lid
5) Insert the "BATTSTAR" board's terminal
boards "A" (with connecting cables) in the
slots previously occupied by the terminal
boards (3) that connected the transformer
to the control board.
_
+
_
+
VEL2 RALL2 COM2
+24 +12 0V
M1 M1
BATTSTAR BATTSTAR
ALIM ALIM PROG PROG D1 D1 D3 D3 ST ST
ACCES.
FUSE
1,6A
LINE FUSE 1A
"BATTSTAR" Control
board board
Terminal board "A"
Hole for fixing
board
_
VEL1 RALL1 COM1 VEL2 RALL2 COM2
ANEL ANEL FOR STYLST ANEL FOR STYLST FOR STYLSTAR FOR STYLST AR AR AR AND ECLIST AND ECLISTAR AND ECLIST AND ECLIST
ANEL FOR STYLST AR AND ECLIST
Control board
"BATTSTAR" board
_
+
_
+
3
FA FC F FA FC F FA FC F FA FC F
FC FC FA FA FC FC FA FA
VEL1 RALL1 COM1 RALL2
VEL2 VEL1 RALL1 COM1 VEL2 RALL2 COM2 +24 +12 0V
VEL1 RALL1 COM1 VEL2 RALL2 COM2
M6 M6 M1 M1
ALIM ALIM
Terminal board "A"
Connectors
Hole for
fixing board
0V
BATTSTAR
AR AR AR
AR
3) Insert the two 12V-1,2Ah batteries and
secure them with yhe bracket and UNI 6954
ø3,9 x 32.
Batteries
-
+
-
+
6) Insert the "BATTSTAR" board connectors
to the batteries as follows:
- connect the black cable connector to
battery n°1's negative (-) pole;
- connect the red cable connector to battery
n°2's positive (+) pole;
- connect the white cable connectors to the
batteries' remaining free poles (+ and -)
(see figure). Warning: after connecting the
batteries, the control board is powered with
24V (D.C.).
Connector
BATTSTA BATTSTAR
PROG PROG D1 D1 ST
24V D.C.
FA FC F FA FC F FA FC F FA FC F
FC FC FA FA FC FC FA FA
VEL1 RALL1 COM1 RALL2
VEL2 VEL1 RALL1 COM1
VEL1 RALL1 COM1 VEL2 RALL2 COM2
M6 M6
ENGLISH
_
N˚1
12V-1,2Ah
+
_
N˚2
12V-1,2Ah
+
VEL2 RALL2 COM2 +24 +12 0V
M1 M1
BATTSTAR BATTSTAR
ALIM ALIM PROG PROG D1 D1 D3 D3 ST ST