Uline H-8204 Manual Del Usuario

H-8204
66 X 72" STEEL L-DESK
TOOL NEEDED
Phillips Screwdriver
Leg Bracket x 6
Bottom Connector
NOTE: Use Phillips screwdriver to tighten screws.
NOTE: Assemble on smooth, non-marring
surface to avoid scratching.
NOTE: Check that all parts are included.
WARNING! Take care when handling metal
parts. Sharp edges may cause injury.
1. Lock drawers. With two people, turn pedestal desk
upside down.
2. Place open end of leg over alignment peg on
bottom of desktop at corner. (See Figure 1)
Figure 1
Leg
Leg Alignment Peg
PAGE 1 OF 8
1-800-295-5510
uline.com
Two Person Assembly
Recommended
Leg x 6 Screw x 14
#8 x 1/2"
Screw x 5
Plate x 1 #8 x 3/4"
ASSEMBLY
PARTS
Drawer Divider x 2
Screw x 1
#8 x 1/4"
3. Insert one leg bracket into corresponding slot in leg.
(See Figure 2)
NOTE: Bracket may flip up or down, depending
on which leg user is installing.
Figure 2
Leg
Bracket
Para Español, vea páginas 3-5.
Pour le français, consulter les pages 6-8.
Grommet x 3 Top Connector
Plate x 1
Key x 2
Leg
Bracket
0721 IH-8204