Charger Mounting; Items Not Covered By Warranty; Important Safety Instructions - GreenWorks Tools 2901207 Manual Del Usuario

·
Check the current at the power outlet with another tool.
Make sure that the outlet is not turned off.
·
Check that the charger contacts have not been shorted
by debris or foreign material.
·
If the surrounding air temperature is not normal room
temperature, move the charger and battery pack to a
location where the temperature is between 7 ˚C and 40˚C .
This product requires assembly.
If the battery is inserted into the charger when warm or
hot, the CHARGING LED indicator light on the charger
may switch on and illuminate RED. If this occurs
allow the battery to cool outside of the charger from
approximately 30 minutes.

CHARGER MOUNTING

1. This charger can be installed hanging on a wall using
two #8 screws (not supplied).
2. Locate the placement for the charger to be wall
mounted.
3. If fastening to wood studs use 2 wood screws (not
included).
4. Drill two holes on center 114.3mm apart ensuring that
they are vertically aligned.
5. If fastening to drywall use wall anchors(not included)
and screws to secure the charger to the wall.
NOTE: If the battery and the charger won't be used for a
long time, please remove the battery from the charger and
pull out the AC power plug.

IMPORTANT SAFETY INSTRUCTIONS

English (Original Instructions)
WARNING
1. SAVE THESE INSTRUCTIONS - DANGER: TO
REDUCE RISK OF FIRE OR ELECTRIC SHOCK
CAREFULLY FOLLOW THESE INSTRUCTIONS.
2. Confirm the voltage available at each country location
before using the charger.
3. If the sharp of the plug does not fit the power outlet, use
an attachment plug adaptor of the proper configuration for
the power outlet.

ITEMS NOT COVERED BY WARRANTY:

1. Any part that has become inoperative due to misuse,
commercial use, abuse, neglect, accident, improper
maintenance, or alteration; or
2. The unit, if it has not been operated and/or maintained
in accordance with the owner's manual; or
3. Normal wear, except as noted below;
4. Routine maintenance items such as lubricants, blade
sharpening;
5. Normal deterioration of the exterior finish due to the use
or exposure.
TRANSPORTATION CHARGES:
Transportation charges for the movement of any power
equipment unit or attachment are the responsibility of
the purchaser. It is the purchaser's responsibility to
pay transportation charges for any part submitted for
replacement under this warranty unless such return is
requested in writing by GREENWORKS TOOLS.
5