Correct Weighing; Automatic Switch-Off/Economy Mode - Seca 757 Manual De Instrucciones

Correct weighing

– Press the green ON key.
,
se(a 88:88:8
secutively in the display. The scale is
then automatically set to zero and ready
to use.
– Place the baby on the scale.
– Read the weighing result off the digital
display.
– If a load greater than 15 kg is placed on
the scale,
St0P
The display has a resolution of 5 g.

Automatic switch-off/economy mode

The scale automatically detects whether it is being operated on rechargeable batteries
alone or whether it is connected to the mains.
– With rechargeable battery operation: automatic shut-down after 1 minute.
– With mains operation: automatic shut-down after 10 minutes.
Taring weight display (NET)
The tare function is useful if an additional weight (such as cloths or a pad on the weighing
surface) are to be ignored in the weighing result. Proceed as follows:
– Place the additional weight on the scale
and keep the NET depressed for some
time.
The "Net" indicator comes on.
– Wait until the display stops flashing and
shows .
0. 0 00
– You can now perform as many weigh-
ing operations as you like with this addi-
tional weight.
– If - - - - appears in the display when the
Tare indicator is on, the tare weight has
been reduced. Pressing the Tare button
returns the display to
scales are completely unladen, the tare
facility is automatically re-set.
pears and the Tareindicator goes out.
Important!
The maximum weight which can be displayed is reduced by the weight of the ob-
jects already placed on the scale.
Model 757
and appear con-
0. 0 00
appears in the display.
. When the
0. 0 00
0. 0 00
ap-
17
GB