For Your Safety; Safety Instructions - Würth GS 700-E Traducción Del Manual De Instrucciones De Servicio Original

GB
Please read this instruction manual
before using the device for the first
time and comply with it.
Retain this instruction manual for
future reference or for subsequent
owners.
Note
It is not allowed to modify the device
or to manufacture additional tools.
Such modifications can cause injuries
and malfunctions.
Only authorised and trained personnel are al-
■
lowed to repair the device. Only use genuine
spare parts from Adolf Würth GmbH & Co.
KG. This ensures continuous device safety.
Adhere to the following safety instruc-
tions during operation
Always wear safety glasses, hearing
protection, protective gloves and face
mask.
The device may only be used if completely
■
and correctly fitted. Missing parts can cause
serious injuries.
14

For your safety

Failure to adhere to this instruction manual and
the safety instructions may result in damage to
the device and cause dangerous situations for the
operator and other people.
In case of transport damage inform vendor
immediately.

Safety instructions

Safety Warnings Common for Grind-
ing, Sanding, Wire Brushing, Polish-
ing or Abrasive Cutting-Off Opera-
tions:
Do not use accessories which are not spe-
■
cifically designed and recommended by the
manufacturer for this power tool. Just because
the accessory can be attached to your power
tool does not that it can be used safely.
The rated speed of the attachment must be at
■
least equal to the maximum speed indicated
on the power tool. Accessories running faster
than their rated speed can break and fly
apart.
Outside diameter and thickness of the at-
■
tachment must conform to the capacity rating
of your power tool. accessories cannot be
adequately guarded or controlled.
The arbour size of grinding wheels, flanges,
■
backing pads or any other accessory must fit
exactly on the spindle of your power tool.
Accessories with arbour holes that do not
■
match the mounting hardware of the power
tool will run out of balance, vibrate exces-
sively and may cause loss of control.
WARNING – Prior to the first
start-up, it is definitely necessary to
read the Safety instructions!