For Your Safety - Würth WSS 225-E Compact Traducción Del Manual De Instrucciones De Servicio Original

Read all safety warnings and
all instructions. Failure to follow
the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-oper-
ated (cordless) power tool.
Safety warnings common for sand-
ing with sanding discs
 This power tool is to be used as a sander.
Read all safety warnings, instructions,
illustrations and specifications provided
with this power tool. Non-observance of the
following instructions can lead to electric shock, fire
and/or serious injury.
 This power tool is not suitable for grind-
ing, working with wire brushes, polish-
ing and cut-off grinding. Applications, for
which the power tool is not intended for, can lead
to hazardous situations and injury.
 Do not use accessories which are not spe-
cifically designed and recommended by
the tool manufacturer. Just because the acces-
sory can be attached to your power tool, it does not
assure safe operation.
 The rated speed of the accessory must be
at least equal to the maximum speed
marked on the power tool. Accessories run-
ning faster than their rated speed can break and fly
apart.
 The outside diameter and the thickness of
your accessory must be within the capac-
ity rating of your power tool. Incorrectly
sized accessories cannot be adequately guarded
or controlled.
 Application tools with threaded inserts
must match the grinder spindle thread.
For accessories mounted by flanges, the
arbour hole of the accessory must fit the
locating diameter of the flange. Accessories
that do not match the mounting hardware of the
power tool will run out of balance, vibrate exces-
sively and may cause loss of control.
Safety warnings for wall and ceiling sanders

For Your Safety

 Do not use a damaged accessory. Before
each use inspect the accessory such as
abrasive wheels for chips and cracks,
backing pad for cracks, tear or excess
wear, wire brush for loose or cracked
wires. If power tool or accessory is
dropped, inspect for damage or install an
undamaged accessory. After inspecting
and installing an accessory, position
yourself and bystanders away from the
plane of the rotating accessory and run
the power tool at maximum no-load
speed for one minute. Damaged accessories
will normally break apart during this test time.
 Wear personal protective equipment.
Depending on application, use face
shield, safety goggles or safety glasses.
As appropriate, wear dust mask, hearing
protectors, gloves and workshop apron
capable of stopping small abrasive or
workpiece fragments. The eye protection
must be capable of stopping flying debris gener-
ated by various operations. The dust mask or respi-
rator must be capable of filtrating particles
generated by your operation. Prolonged exposure
to high intensity noise may cause hearing loss.
 Keep bystanders a safe distance away
from work area. Anyone entering the
work area must wear personal protec-
tive equipment. Fragments of workpiece or of a
broken accessory may fly away and cause injury
beyond immediate area of operation.
Working safely with this product
is possible only when the operat-
ing and safety information are
read completely and the instruc-
tions contained therein are strictly
followed.
12