Care And Maintenance - Kobalt KBTS 124B-03 Manual De Instrucciones

OPERATING INSTRUCTIONS
6. Connecting to Bluetooth
a. Press and hold the ON/OFF button (A) approximately 3 seconds to turn the Bluetooth
speaker on. The speaker will default to Bluetooth pairing mode and the indicator (E) will
flash blue light continuously until it has successfully paired or timed out.
b. If previously paired to the desired device, the speaker will automatically reconnect to the
same device when the speaker is turned on.
c. If no Bluetooth device was previously paired, the speaker will continue to search for a
signal for 10 minutes.
d. Once the device has successfully paired with the speaker, use the device controls to move
through tracks and to control volume.
e. To pair the speaker to a different device, press and hold the Bluetooth pair button (D) for 3
seconds until the indicator light flashes. The speaker will then be in Bluetooth pair mode
and can be connected to a different device. Consult the instructions for your device.
7. Connecting to AUX Device
a. Insert the plug of audio wire into the audio IN jack (I) and make sure that they are properly
connected.
b. Press and hold the ON/OFF button (A) approximately 3 seconds to turn the Bluetooth
speaker on. The speaker will be in AUX mode and the indicator (E) will illuminate a blue
light.
c. Connect an MP3 player, CD player, or other audio device directly to the speaker, using the
audio wire.
NOTE: In the absence of a connection to an audio wire, the speaker will enter into Bluetooth
pairing mode. When connected to an audio wire, the speaker will change from Bluetooth
pairing mode to audio mode.

CARE AND MAINTENANCE

All maintenance should only be carried out by a qualified service technician.
WARNING
• To reduce the risk of personal injury and damage, never immerse your speaker, battery pack or
charger in liquid or allow a liquid to flow inside them.
Cleaning
Before cleaning or performing any maintenance, remove the battery from the Bluetooth
speaker. For safe and proper operation, always keep the Bluetooth speaker clean.
Always use only a soft, dry cloth to clean the Bluetooth speaker. Never use detergent or
alcohol. Clean dust and debris from vents. Keep the speaker handle clean, dry and free of oil
or grease.
Never use flammable or combustible solvents around tools.
9