Safety Instructions; Intended Use - wolfcraft 3406000 Traducción Del Manual De Instrucciones Original

BDAL 3406.000_2017 27.09.17 13:45 Seite 8

Safety instructions

• It is essential to comply with the safety instructions of the manufacturers who made your
drive machines.
• These appliances must conform to the VDE regulations. Appliances built after 1995 must have
CE certification.
• Always disconnect the power supply:
– before changing attachments
– before changing work pieces
– before maintenance jobs
– while the equipment is not in use.
• Before commencing work, test the operability of the equipment and the tools.
Never work with damaged or blunt tools.
• Before commencing work, check that the equipment is mounted correctly (e.g. check screwed
joints).
• Firmly clamp the work piece into position.
• Ensure that the equipment is firmly supported and that you are standing in a stable position
and on firm ground.
• When using equipment and tools be sure to follow the data that is specified on the product,
the packaging or in the operating instructions concerning minimum/maximum speeds and
the rotation direction.
• The tools should only be used for their intended purpose.
• Never remove any protective devices.
• Make sure that your clothes fit tightly, do not wear gloves and protect your hair.
• Keep the drill's connecting cable away from the working space. Damaged or entangled cables
will increase the risk of an electric shock.
• Protect your ears when carrying out work which pro duces a high level of noise.
• Wear safety goggles and protection for the mouth and nose when carrying out work which
produces dust, shavings, fumes or sparks.
• Never work towards your body.
• Never reach into the equipment while it is in operation.
• Ensure that all electrical equipment is protected against damp, dust and humidity.
• Keep children away from your workshop and store your equipment and tools in a safe place.
• Never allow inexperienced persons to work with your equipment and tools without instruction
or supervision.
• Always plan your work carefully and be sure to maintain concentration.
• Keep your workplace neat and tidy.
• Do not attempt modifying or retrofitting the product.
• Use only spare parts from wolfcraft

Intended use

• The drill stand has been designed to accommodate mains or battery operated drills with
a collar diameter of 43 mm. Other equipment must not be used with this drill stand.
• The drill stand will be bolted to a work bench or another firm base.
t
® .
8