Homewerks 7141-50 Manual Del Usuario página 9

EXISTING CONSTRUCTION ASSEMBLY INSTRUCTIONS
7. Insert fan housing through existing hole in ceiling.
The fan housing should be level and perpendicular
to the joist.
8. Mount fan housing to the joist by screwing in 3 screw
(included) through the 3 holes located on the inside of
the fan housing.
9. Reconnect fan motor to the power unit. Insert motor
assembly back into the fan housing using the three
screws removed in step 3.
10. Attach LED wire connections to the inserts in the fan
housing. Pinch mounting springs on grille and insert
into narrow rectangular slots inside the fan housing.
Push grille up toward ceiling.
Turn on electricity at breaker box after finishing.
7
8
9
10
9
Ceiling joist
3 screws
Fan
housing
4 hole
2 hole