MioWork A200 Serie Guia De Inicio Rapido página 9

en
For more information
Support
For initial support, contact your IT department or your local authorised dealer.
Occasionally, the manufacturer may offer free system updates to improve user experience. Please
regularly check the website http://miowork.mio.com/ for more information.
IP54
The IEC 60529/IP54 is a European system of test specification standards for classifying the degree
of protection provided by the enclosures of electrical equipment. An IP54 designation means that
the unit withstands dust protected (Ingress of dust is not entirely prevented, but it must not enter in
sufficient quantity to interfere with the satisfactory operation of the equipment; complete protection
against contact), and water splashing for up to 5 minutes (water volume: 10 litres per minute, Pressure:
80-100kPa). The manufacturer guarantees this grade provided the battery door and all jack covers are
properly and securely closed. This device is not IPX7/IPX8 grade; immersion in water or water-pressure
such as washing the unit with running water may cause damage to the unit and voids warranty.
Regulatory information (CE)
2200
Note: For regulatory identification purposes, your device is assigned a model number of N435.
Hereby, MiTAC declares that this N435 is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
This device complies with the R&TTE Directive (1999/5/EC), the EMC Directive (2004/108/EC), and
the Low Voltage Directive (2006/95/EC) issued by the Commission of the European Community. -
issued by the Commission of the European Community. Compliance with these directives implies
conformity to the following European Standards:
EN 301 489-1: Electronic compatibility and Radio spectrum Matters (ERM), Electromagnetic
Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical
requirements.
EN 301 489-3: Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short-
Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz
EN301489-17: Electronic compatibility and Radio spectrum Matters (ERM), Electromagnetic
Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2.4
GHz wideband transmission systems and 5 GHz high performance RLAN equipment.
8