Installation And Setup - IK iRig PRO Guía Rápida De Inicio

iRig PRO is bus powered, meaning it gets its power from the
device it's plugged into. It also has a 9V battery compartment,
but you only need a battery if you're using a condenser
microphone requiring phantom power. In all other instances,
iRig PRO doesn't need the battery to operate.
Register your iRig PRO
By registering, you can access technical support, activate
your warranty and receive free JamPoints™ which will be
added to your account. JamPoints™ allow you to obtain
discounts on future IK purchases! Registering also keeps
you up-to-date with product news and update information.
Register at: www.ikmultimedia.com/registration

Installation and setup

Insert the included 9V battery in the battery compartment
(5) on the bottom side of iRig PRO. Depending on the
battery brand and model, it may be necessary to close the
compartment to keep the battery in place. This is normal,
and it doesn't interfere with the proper operation. If you
don't plan on using condenser microphones that require
phantom power, you can skip installing the battery.
iOS Devices:
1. Connect the included 30-pin or Lightning cable to iRig
PRO Mini DIN connector (6) first.
2. Connect the 30-pin or Lightning cable to the connector
on your iOS device. The Power / Audio Level LED (2) on
iRig PRO will turn dark blue, meaning that iRig PRO is
powered and in Standby mode.
3. Make sure phantom power is turned off by setting the
Phantom Power switch (7) to the OFF position. Check
that the Phantom / MIDI LED (1) on iRig PRO is off.
4. If you are using a microphone, connect it using an XLR
cable, to the iRig PRO microphone input (4).
5. If you are using an instrument like a guitar or a bass,
connect it using a regular ¼" plug guitar cable to the iRig
PRO instrument input (4).
8