12. Use wrench to separate the hinge shaft and
then flip the hinge and reattach the hinge shaft.
And remove the shim at the top and attach it to
the other side.
13. Reassemble the hinge on the refrigerator door
by reversing the step 11.
Make sure to use left side hinge cover (which
can be found underneath the removed plastic
cover from step 2) and remove the grommet.
After reassembling the hinge, wire and the
hinge cover, switch the side from right to the
left.
Grommet
14. After switching the hinge, close it with the wire
cover on the top of refrigerator door.
"Cover Wire Door R" can be
found in the packaging
DA68-03008E-04.indb 15
15. Take off the handle cover and remove the
screws, make sure to detach the caps and the
handle from the left to right side of the door.
(Make sure to cover the left side with detached
caps.)
Handles may not have cover depending
on the models.
16. Switch the hinge cap and attach the front leg
cover.
Carefully put the refrigerator door back on.
Hinge cap
17. Tighten the 3 bolts and then connect the wires
back together.
Make sure your refrigerator is unplugged
before handling electrical wires.
WARNING
English - 15
2016. 3. 24.
3:54