AirLive WLA-9000AP Guia De Inicio Rapido página 6

Important Information
The AP mode's default IP address is 192.168.1.1
The default Subnet Mask is 255.255.255.0
The default is set to Dual AP mode.
The default password is airlive
The default SSID is AirLive1 with channel "Auto" on WLAN1, AirLive2 with
channel "Auto" on WLAN2
The default DHCP client is Disabled
Configuration Steps
Please install your network cards first before the AP
Screw-in antennas (clockwise) into the Antenna connector
Connect the power and LAN cable to the back
Use your wireless card to do a site survey, default SSIDs are "AirLive1" and
"AirLive2" with channel "Auto" for both wireless interfaces.
If you need to change AP's configuration, please follow the procedure
below:
The AP mode's default IP address is 192.168.1.1. Please make
sure your computer IP is in the same subnet as the AP (i.e.
192.168.1.x)
Open the web browser and enter 192.168.1.1.
Enter the Password airlive.
802.11 a/b/g
Dual Radio Access Point
WLA-9000AP
English
5
5