Publicidad
STEP 6
Locate the wall studs and determine the placement for the cabinet. Mark the stud locations on the
wall for the wall support (F).
Drill two 3/16" (5mm) diameter holes in the center of the wall support (F) as shown.
Locate the wall studs and attach the wall support to the wall into the studs using two screws,
making sure the wall support is level. Hang cabinet onto wall support as shown.
The distance from the bottom edge of the wall
support (F) to the top surface of the top (B).
6‐9/16"
16.7 cm
F
(x2)
#A13800
B
F
12
stud
wallboard
Publicidad
