Assembly - HAMPTON BAY MTVS2500SE Guía De Uso Y Cuidado

assembly

1
Preparing the base
□ Locate the base (A) and place it on the floor. Do not place it up
against the wall at this point in the assembly, as you need to get in
behind the mantel during assembly.
□ Insert and tighten the leg (R) into the underside of the base (A).
□ Insert 8 wood dowels (AA) in the unthreaded holes in the base (A).
□ Insert 8 cam lock dowels (BB) into the threaded holes in the base (A).
Make sure the threaded side is facing down so you can insert and
tighten each cam lock dowel (BB) into each hole in the base (A).
2
Preparing the interior panels
□ Insert and tighten 3 cam lock dowels (BB) into the left and right side
trim pieces (D & E). Make sure the threaded side is facing down so
you can insert and tighten each cam lock dowel (BB) into each hole
in the left and right side trim pieces (D & E).
□ Line up and insert the cam lock dowels (BB) in the left and right side
trim pieces (D & E) into the holes of the left and right side interior
panels (B & C).
□ Insert 3 cam locks (CC) into the left and right side interior panels (B &
C). Make sure the arrows on the cam locks (CC) are facing toward the
left and right trim pieces (D & E). Turn the cam locks (CC) to tighten.
Do not strip the cam locks by over tightening.
□ Insert and tighten 3 cam lock dowels (BB) into the central shelf trim
(G). Make sure the threaded side is facing down so you can insert
and tighten each cam lock dowel (BB) into each hole in the central
shelf trim (G).
□ Line up and insert the cam lock dowels (BB) in the central shelf
trim (G) into the holes of central shelf (F).
□ Insert 3 cam locks (CC) into the central shelf (F). Make sure the
arrows on the cam locks (CC) are facing toward the central shelf
trim (G). Turn the cam locks (CC) to tighten. Do not strip the cam
locks by over tightening.
BB
AA
B
AA
BB
7
Please contact 1-877-527-0313 for further assistance.
A
R
C
D
F
G
HAMPTONBAY.COM
E