Power Management - IRiver Astell&Kern Manual Del Usuario

3. Attach a magnetic holder on
each side the microphone
stand.
4. Slip a windscreen onto the microphone,
and secure the bottom part of the SC4061
microphone unit into the groove of
a magnet holder.
5. Adjust the tripod grip by turning
the bolt on its right side, and
attach the AK Recorder.

Power Management

Charging
1. We recommend using a 5V 3A adapter (sold separately) for optimal
charging performance during a recording session. A regular 5V 2A
adapter will not provide sufficient charging when recording.
2. You may use a regular 5V 2A adapter when the AK Recorder is not
connected to an AK portable player.
Turn On/Off
1. The AK Recorder does not provide a separate power button.
2. Connect and secure a compatible AK portable player to the AK Recorder,
and turn on the AK portable player.
3. A message will be displayed on the indicator when a compatible AK
portable player is successfully connected to the AK Recorder.
4. After the "Recorder connected" message is displayed, a [REC] menu will
be displayed at the top of the main menu of the AK portable player.
5. Select the [REC] menu to enter the AK Recorder's main menu.
6. Press the [CLOSE] button at the bottom of the AK Recorder's main menu
to display the main menu of the connected AK portable player.
A 5V 2A adapter will not provide sufficient charging when an AK portable player is connected
to the AK Recorder. Only use a 5V 2A adapter to charge the player and AK Recorder when
separated. We recommend using a 5V 3A adapter (sold separately) for optimal charging
performance when the devices are connected.
The device may become hot during extended recording or charging sessions. However,
this does not affect the performance of the product or quality of recordings. We recommend
using a tripod for extended recording sessions or when charging while recording.
ENGLISH