Zyxel V300 Serie Manual Del Usuario página 8

1. LAN: Use an Ethernet cable to connect the V300 to your network.
V301 only: If you are using Power over Ethernet (PoE), connect the
Ethernet cable supplying power to this port. See
over Ethernet (Optional)
2. PC (optional): Use an Ethernet cable to connect your computer to the
PC port on the V300 to access your network through the V300, or to
configure the V300 using the web configurator (see your User's
Guide for information on using the web configurator).
3. HANDSET: Connect the included handset cable to the port on the
V300's base. Connect the other end to the handset. Hang up the
receiver before you connect the power.
4. POWER: Connect the included power adapter to the POWER socket
on the V300. Plug the power adapter into an appropriate power
source.
V301 only: If you are using Power over Ethernet (PoE), you do not
need to connect the power adaptor.
8
for more information on PoE.
V301 Only: Power