Displaying The Web Application; System Settings; Installing Certificates - Sony PWS-100TD1 Manual Del Usuario

Displaying the Web Application

You connect to the unit via the network from a client PC
and use the web application in a web browser on the client
PC to control and configure the unit.
Recommended client PC environment
CPU: Core i5 3 GHz or higher
Memory: 4 GB or higher
OS: Windows 7 Pro 32/64-bit
Windows 8/8.1 Pro 32/64-bit
Mac OS X 10.8/10.9
Web browser: Google Chrome 40 or later (update to the
latest version)
Display resolution: 1366 × 768 pixels or higher
Connect a computer satisfying the above conditions to the
LAN 1 or LAN 2 connector on the rear panel of the unit.
Enter "https://(IP_address):8443/tds or https://pws-100-
<serial_number>:8443/tds" in the address bar of a web
browser on the computer (where IP_address is the address
specified in "Configuring the network") to display the
web application.
Enter the user name and password when the login screen
appears.
The following user name and password are configured by
default.
User name: admin
Password: tds

System Settings

Configure the system on the Setting screen in the web
application.
Log in as a user with administrator privileges when
logging in to the web application.
For details about operating the web application, refer to the
Help of the application.
Changing the interface language
You can change the interface language of the web
application.
Select the language in [Language] on the [My Settings]
page of the Setting screen.
Operation frequency selection
Select the operation frequency of the system. You select
the frequency under [Ingest Settings] on the [Ingest] page
of the Setting screen.
Adding users
To add user accounts in addition to the default admin
account, add new users on the [Users] page of the Setting
screen.
Registering a transfer destination
To transfer ingested clips to a cartridge or network server,
register the transfer destination on the [Transfer] page of
the Setting screen.

Installing Certificates

Displaying the web application using an https connection
from a web browser may display an error message, such as
"The site's security certificate is not trusted!". To connect
successfully via https without an error, a root CA
certificate (client certificate) corresponding to the server
(PWS-100-<serial_number>) must be installed in the web
browser.
The following describes the procedure for installing a
certificate using Google Chrome.
Root CA certificate installation procedure
1
Access the web application using https in a web
browser.
An error message, such as "The site's security
certificate is not trusted!" appears.
2
Click the lock icon on the left hand end of the address
bar.
3
Click [Certificate information] in the popup window.
The [Certificate] dialog appears. Make a note of the
certificate issuer "PWS-100-<serial_number>" in the
dialog.
4
Click the [Details] tab, then click the [Copy to File]
button.
The Certificate Export Wizard appears.
5
Click [Next].
6
Select "DER encoded binary X.509 (.CER)," then
click [Next].
7
Click the [Browse] button and specify a folder in
which to store the certificate, then click [Next].
Exporting of the certificate commences.
8
When the export wizard completion window appears,
click [Finish].
9
When the message window appears, click [OK].
31
Setting Up