Safety Information - MAXIMUS Smart Security Light Manual De Instrucciones

SAFETY INFORMATION

WARNING
• Risk of fire or electric shock. LED light installation requires knowledge of luminaires electrical systems. If not
qualified, do not attempt to install. Contact a qualified electrician.
• Disconnect power at fuse or circuit breaker before installing or servicing.
• No user serviceable parts inside. To avoid electrical shock, do not disassemble product.
• To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
• Use only on 120V AC, 60Hz circuits.
PREPARATION
• Before beginning assembly of product, make sure all parts are present. Compare parts with package contents
list. If any part is missing or damaged, do not attempt to assemble the product.
• Tools needed:
Phillips screwdriver
Step ladder
Silicone sealant (optional)
INSTALLATION
1
1. Insert fixture long screws and nuts into the
bracket as shown.
3
3. Use the screw length indicator to adjust the
length of the two long screws. Then, tighten
the two nuts.
2
2. Fasten bracket to junction box with the shorter screws.
4
4
4. Use the holding hook to suspend the light fixture and free
up both hands for wiring.
3