Publicidad
ROTAID SOLID PLUS
Installation manual
1. Determine the location
where you wish to mount the
Rotaid. Make sure there are no
irregularities present at the desired
location. Please take the fire safety
and evacuation regulations into
account. If mounted on a stone or
concrete wall, please use the wall
anchors prior to fixation.
2. Mark the 4 holes for drilling
and use the screws and rings for
fixation.
pag. 4
Rotaid - Plus
3. Use an Allen key (5mm) to
firmly attach the nylon belt to the
back plate.
4. After attaching the belt and
cover, now please mount both
long bolts in the indicated
holes. Mount these by hand
via a screwdriver and do not
overtighten. You can now hang the
AED via its handle on the bolts.
5. You can now place the AED into
the cabinet by using its handle or
carrying case handle.
Please rotate the cover on the
back plate by starting slightly
counterwise and rotate to the right
until the cover reaches the stop.
When correctly placed, the hook
on the bottom of the cabinet falls
through the cover.
Your Rotaid Plus is now ready
for use!
Publicidad
