GBS Elettronica 41986 Manual Del Usuario página 42

2.1.1.1 Satellite Name
Select the satellite name for the signal received.
2.1.1.2 LNB Type
Select the type of LNB converter
2.1.1.3 Low frequency / High frequency LNB
Use the numerical keypad to enter the frequency of the LNB converter.
2.1.1.4 Frequency
Use the numerical keypad to enter the frequency of the signal.
2.1.1.5 Symbol Rate
Use the keypad to enter the symbol rate
2.1.1.6 Polarity
Select the polarity mode (OFF/13V/18V)
2.1.1.7 SCR Function
Select "Quick Search" from the menu; select "Unicable" for the "LNB Type".
Go to the next page and select the channel where the SCR LNB is connected. At this point,
finish setting up the SCR. In "TP" you can select or enter the data for the satellite awaiting
the signal.
42