TRANSOLID silQgranite Instrucciones De Instalación

These instructions are for installing Transolid
mount sinks (also known as drop-in sinks) are installed from above the countertop
and sealed to the top of the counter. If you are installing another type of sink, such
as Undermount sink which is installed below the counter, please refer to instructions
specifically for those sinks.
Transolid recommends that all countertops be cut by an approved or certified install-
®
er and that the sinks be installed by the installer whenever possible. The countertop/
sink unit ideally should installed as one on the jobsite.
Transolid is not responsible for sink or countertop if damaged during installation.
®
Remember, it is your responsibility to follow all local plumbing and building codes.
Inspect sink for damage prior to beginning installation. Do not install a damaged unit.
The warranty will be voided if these installation instructions are not followed.
Templates are supplied only as a guide. The physical use of the sink will ensure a
more accurate cut-out.
The instructions that follow are for installing a Transolid
sink. Be sure to read all instructions completely before beginning installation.
Eye protection (safety glasses/goggles)
strongly recommended
Ear protection strongly recommended
Top mount (drop-in) template supplied by
Transolid
Top mount (drop-in) clips supplied by Transolid.
(NOTE: these come with the sink and are in a
separate plastic bag. Please make sure they
are not thrown away with the carton.)
LEGAL DISCLAIMER
All technical data and information provided in this publication is done as a public service to customrs of Transolid
All names, designs, and model numbers of products are trademarks of Transolid
change without notice or obligation. Transolid
endeavors to provide you with accurate information and descriptions of its products, accuracy and completeness cannot be guaranteed. Transolid
is not responsible for, nor does it have any liability for any mistakes or typographical errors, including liability for incidental, consequential, or special
damages. All products should be inspected and measured promptly upon delivery and certainly before any improvements or alterations are done in
anticipation of or preparation for installation. Transolid
use or application.
Nothing contained in this publication is to be construed as contractual or providing any form of warranty or representation on the part of Transolid
TRANSOLID MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY
®
OR OF FITNESS FOR A PARTICULAR PURPOSE, AS TO THE INFORMATION CONTAINED HEREIN OR THE PRODUCTS DESCRIBED HEREIN.
INSTALLATION INSTRUCTIONS
silQgranite
TOP MOUNT
ATTENTION INSTALLER:
Tools and Materials You will Need
may also change or discontinue models of its products without notice or obligation. While Transolid
®
assumes no liability for the use of such information or for any damages incurred through its
®
SINKS
®
top mount
®
silQgranite
top mount stainless steel
®
Silicone adhesive sealant (not supplied)
Masking Tape
Slotted screwdriver
Ruler/Tape measure
Pencil (not permanent marker)
Drill and drill bit
1-1/4" Hole Saw
Saber Saw (if countertop cutout is required)
. Prices and specifications of Transolid's products are subject to
®
sinks. Top
®
and consumers of our products.
®
®
®
.
®