Descargar Imprimir esta página

Metra 95-7879 Instrucciones De Instalación

Honda cr-z 2011 y mas
Ocultar thumbs Ver también para 95-7879:

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

INSTALLATION INSTRUCTIONS FOR PART 95-7879
Honda CR-Z 2011-up
KIT FEATURES
• Double DIN radio provision
• Painted and textured to match factory finish
KIT COMPONENTS
• A) Radio trim panel • B) ISO Brackets • C) (7) #8 x 3/8" Phillips truss head screws
• D) (2) #6 x 3/8" Phillips pan head screws • E) (4) White plastic clips • F) (1) Metal clip
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1729 - Honda harness 2008-up
Antenna Adapter: • 40-HD11 - Honda antenna adapter 2009-up
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
METRA. The World's best kits.
APPLICATIONS
95-7879
C
D
1-800-221-0932
E
F
metraonline.com
Table of Contents
Dash Disassembly
– Honda CR-Z 2011-up ........................................... 2
Kit Preparation ....................................................... 2
Kit Assembly
– Double DIN radio provision ................................... 3
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION

Publicidad

loading

Resumen de contenidos para Metra 95-7879

  • Página 1 INSTALLATION INSTRUCTIONS FOR PART 95-7879 APPLICATIONS Table of Contents Honda CR-Z 2011-up 95-7879 Dash Disassembly – Honda CR-Z 2011-up ........... 2 Kit Preparation ............2 Kit Assembly KIT FEATURES – Double DIN radio provision ........3 • Double DIN radio provision •...
  • Página 2: Kit Preparation

    95-7879 re-using the factory hardware. 4. Remove (2) Phillips screws holding the passenger airbag light from the factory panel and install into the 95-7879 using the supplied #6 screws. Note: (Figure A) is on next page Continued to kit assembly (Figure B)
  • Página 3: Double Din Radio Provision

    Double DIN radio provision 1. Locate the factory wiring harness Red factory clip Hazard switch in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.
  • Página 4 INSTALLATION INSTRUCTIONS FOR PART 95-7879 NOWLEDGE IS OWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
  • Página 5: Componentes Del Kit

    INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-7879 APLICACIONES Indice Honda CR-Z 2011 y mas 95-7879 Desmontaje del tablero – Honda CR-Z 2011 y mas ........2 Preparación del kit ..........2 Ensamble del kit CARACTERÍSTICAS DEL KIT – Provisión de radio doble DIN......... 3 •...
  • Página 6: Honda Cr-Z 2011 Y Mas

    Desmontaje del tablero 95-7879 Honda CR-Z 2011 y mas Preparación del kit 1. Desenganche y quite la tapa del panel del tablero más bajo que 1. Quite el gancho de arriba del está arriba del bolsillo y quite el centro del radio de fábrica e tornillo Phillips de 8 mm.
  • Página 7: Provisión De Radio Doble Din

    Ensamble del kit 95-7879 Preparación del kit Provisión de radio doble DIN 1. Ubique el arnés del cableado Interruptor de las luces de fábrica en el tablero. Metra Gancho rojo de fábrica intermitentes recomienda usar el adaptador de acoplamiento adecuado de Metra o AXXESS.
  • Página 8 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-7879 EL CONOCIMIENTO ES PODER Mejore sus habilidades de instalación y NOWLEDGE IS OWER fabricación inscribiéndose en la escuela de Enhance your installation and fabrication skills by enrolling in the most recognized and respected dispositivos electrónicos móviles más reconocida...