Metra 95-7882B Instrucciones De Instalación

Honda Civic 2013-2015
KIT FEATURES
• ISO DDIN radio provision
Note: This kit will not retain the i-MID display
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) (3) metal panel clips • D) (3) plastic panel clips
• E) (4) #8 x 3/8" Phillips truss-head screws • F) (9) #8 x 3/8" Phillips pan-head screws
• G) (3) #4 x 3/8" Phillips truss-head screws • H) (2) #8 x 1/2" Phillips pan-head screws
A B
F
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • Please visit metraonline.com for options
Antenna Adapter: • 40-HD11
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver • 8mm socket wrench
METRA. The World's best kits.
Installation instructions for part 95-7882B
95-7882B
C D
G H
™
E
metraonline.com
Table of Contents
Dash Disassembly ..................................................2
Kit Preparation ........................................................3
Kit Assembly
– ISO DDIN radio provision ...................................... 3
CAUTION!
Metra recommends disconnecting the negative bat -
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con -
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
© COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION