3. Insert pack through slot at bottom of dispenser.
Insert up to three packs at once or until dispenser is
full, pushing packs up as each is inserted. Pull down
towel arm. (See Figure 11)
Figure 11
NOTE: Ensure blue Velcro strips align with each
pack inserted. This keeps towels connected
and working correctly.
Dispensers should be dusted with a soft, lint-free cloth. Do not use abrasive materials or paper as they will scratch the
surface. For cleaning, use a clean, damp cloth, or a solution of mild soap and water. At least once per month it is
recommended to remove paper dust from inside the dispenser with a vacuum or compressed air. Always wear eye
protection when using compressed air.
PAGE 3 OF 9
LOADING INSTRUCTIONS CONTINUED
x3
MAINTENANCE
4. Take leading towel from top of dispenser and pull
down in front of towel slot. Begin feeding towel
through dispenser arm, finishing by rolling wheel
down until towel is fully through. (See Figure 12)
Figure 12
5. Close cover and begin dispensing.
1-800-295-5510
uline.com
0321 IH-9492