Uline H-9500 Guía Rápida

H-9500
2" LEFT-HANDED SIDE
LOADER TAPE DISPENSER
1. Place dispenser on flat surface. Push tape roll fully
onto tape wheel. Be sure tape unwinds with sticky
side down. (See Figure 1)
2. Unroll 5-6 inches of tape (sticky side down) and
thread between smoothing roller and metal loading
gate. (See Figure 2)
3. Pull tape over smoothing roller allowing tape to
unroll freely off tape wheel. (See Figure 3) To unwind
tension, see Figure 4.
Figure 1
A
PAGE 1 OF 3
1-800-295-5510
uline.com
ADJUSTABLE
UNWIND TENSION
KNOB
OPERATION
Figure 2
PARTS
TAPE PRESSING
WIPER
TAPE SMOOTHING
ROLLER
TAPE CUTTING BLADE
ADHESIVE SIDE
OF TAPE DOWN
METAL LOADING GATE
4. Start desired depth on the side of the box.
(See Figure 5, A)
5. Glide dispenser along the carton seam - smoothing
roller automatically presses tape to the package.
(See Figure 5, B)
6. Continue down the opposite end to desired length.
In one motion, tilt dispenser forward so tape pressing
wiper stops rolling tape, serrated blade cuts tape
and wiper smoothes the tape end. (See Figure 5, C)
Figure 3
B
Para Español, vea página 2.
Pour le français, consulter les page 3.
Figure 4
Figure 5
C
0921 IH-9500