Publicidad
Idiomas disponibles
Idiomas disponibles
AVENTICS | MSC | R41209736–BAL–001–AF | English
4. Guide the bottom sensor cable at the end of cable slot B to the
top and place it in the last section of cable slot A above the side
air connections.
8
Commissioning
Dangerous movements!
Danger of injury!
O
Make sure that there are no foreign objects in the travel
range of the mini slide and no one reaches into the stroke
direction of the slide.
O
If necessary, assemble a protective grid.
Shorter service life!
Exceeding the cushioning limits (see online catalog of
1)
AVENTICS
) reduces their service life!
O
Always comply with the limits for the cushioning.
Increased wear of the mini slide without cushioning!
Operation without sufficient cushioning is not permissible. The
mini slide may be damaged.
O
Always use the mini slide with cushioning.
1)
www.aventics.com/pneumatics-catalog
Setting the stroke range
NOTICE! Always use the mini slide with cushioning.
B
WARNING
NOTICE
You can roughly adjust the stroke
range h via stroke limitation bolts of
different lengths (9) or finely adjust it
via the applied cushioning (5).
NOTICE! The stroke limitation bolts cannot be replaced if the mini
slide is equipped with pneumatic cushioning for the forward
stroke.
R
A
The stroke setting range is limited in the retracted position (return
stroke) due to its construction.
O
You can find the applicable stroke range in the following tables
for the versions MG and HG.
Guide (version) MG
Stroke
Ø
length
[mm]
[mm]
8
10–80
12
10–30
40
50–100
16
10–40
50
80
100
20
10–30
40
50
80–100
25
10–30
40
50
80
100
h
1
5
9
Stroke setting range [mm]
Return stroke with
end position lock or
with pneumatic
Return
cushioning
stroke
4
3
5
3
2
9
1
3
6
7
5
1
3
11
9
12
9
3
7
3
7
9
23
Forward
stroke
5
9
11
15
15
Publicidad
