Replacing The Batteries; Technical Specifications - tibelec REF 975850 Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 14

Replacing the batteries

The consumer is obliged by law to recycle all used batteries and accu-
mulators. It is forbidden to throw them in the ordinary bin! Refer to the
environmental protection details.

Technical specifications

• LCD display, max 4-digit reading
• Sampling rate: approximately 3 times per second
• Jaw opening capacity : 27mm
• Measurable conductor : ø 25mm max.
• Operation temperature : 0°C~40°C
• Storage temperature : -20°C~ 60°C
• Size and weight : 34mm x 65mm x 151mm / 127gr (included batteries)
• Safety standard : 300V CAT III
12
When the symbol
new ones.
1. Turn the selector to Off
2. Loosen the screw on the back of the clamp
3. Open and replace the batteries in the corresponding
area with batteries of the same type (3xCR2032 3V).
4. Tighten again.
Certified in accordance
with European standards
Risks resulting from
hazardous voltages
Class II equipment without
ground connection
:
+ -
appears, replace the batteries with
:
Do not dispose of
appliances bearing this
symbol with domestic
waste. Use a suitable
collection point

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Emc306c

Tabla de contenido