Connect The Cables And Check The Operation - Samsung SCC-B1311 Instrucciones De Operación

Connect the cables and check the operation

VIDEO IN Terminal on
the rear of moniter
BNC Cable
VIDEO OUT Terminal
1. Connect one end of the BNC cable to the VIDEO OUT
port of the monitor.
2. Connect the other end of the BNC cable to the VIDEO
In port.
3. Connect the camera to the power adaptor. Use a
slotted flat (-) screwdriver to connect one end of the
two-line power adaptor to the DC/AC IN port of the
camera. (GND: marked with a white line on the cable)
- You can plug in to a power outlet regardless of the
polarity for both AC 24V and DC 12V adaptor.
07
AC24V/DC12V models (SCC-B1311, B1311P)