Samsung SCC-C6323P Manual Del Usuario página 10

Introduction
PARTS NAME & FUNCTIONS
❖
SCC-C6323
Surface Mount Bracket
Separating Slit
Dome Cover
Main Unit / Surface Mount Bracket
• Surface Mount Bracket
This is used to install the camera directly on the
ceiling. After separating this cover fi rst and then
attach this directly to ceiling. Camera must be
assembled at the last stage.
Do not use this bracket when installing camera on
the wall with wall mount bracket or on the ceiling with
ceiling mount bracket.
• Separating Slit
Using a coin, you can separate upper part lower
body of the dome.
10 – 10X MINI SMART DOME CAMERA
Back of Main Unit
• Dome Cover
Do not detach protection vinyl from dome cover
before fi nishing all installation process to protect
dome cover from scratches or dust.
• DIP Switch
Adjusts camera ID and protocols.
• Cable Duct
When you want to install the camera on the surface
of hard ceiling, you need to handle the cable through
side of the dome. In this case, break the side wall bit
and make the cable pass through the cable duct.
DIP Switch
Cable Duct