Publicidad
4
Raise the G Vertical Divider upright with the
group of small holes near the upper end.
Raise the D Fixed Shelf and guide the posts
and dowels into one end of the Vertical
divider. Gently tap the Fixed Shelf to seat the
dowels. Use a screwdriver to fasten the Cams
by turning them clockwise until they stop.
Raise the Base Panel with Casters and guide
the posts and dowels into the other end of
the Vertical divider. Gently tap the bottom of
the Base Panel to seat the dowels. Use a
screwdriver to fasten the Cams by turning
them clockwise until they stop.
Insert four H Cams into each large hole in
the bottom of the Base Panel with the cam
arrow pointing to the nearest edge hole.
5
Raise the C Right Side Panel and guide the
posts and dowels into the holes on the
edges of the Base Panel and Fixed Shelf.
Gently tap the Side Panel to seat the dowels.
Use a screwdriver to fasten the Cams by
turning them clockwise until they stop.
6
Slide the A Back Panel down onto the
posts and dowels between the Base Panel
and Fixed Shelf. Fasten the Cams as previ-
ously instructed.
Position the two E Rails so the cam sides
face each other. Slide the Rails down onto
the posts and dowels. Gently tap the upper
end of the Rails to seat the dowels. Use a
screwdriver to fasten the Cams by turning
them clockwise until they stop.
5390-37: 3 of 4; Rev. 3: 11/04
Safco Products Company, New Hope, MN 55428
D
G
E
H
C
A
Publicidad
