Error Codes - Groeneveld Greensight Active Safety Manual Instrucciones De Uso

Error codes

In the event of a malfunction, the self-test will end the monitor will show the error
code and location of the malfunction. The tables below show the meaning of the
error codes that may appear on the monitor or display.
Error code* Explanation
Communication error detected.
FFF
Left bottom sensor or sensor cable error detected.
F1 - F2 - F3
Right bottom sensor or sensor cable error detected.
F4 - F5 - F6
Left and right bottom sensor or sensor cable error detected.
F7
Left top/side sensor or sensor cable error detected.
E1
Right top/side sensor or sensor cable error detected.
E2
Hardware failure detected.
HF
Supply voltage error detected.
F10
Memory error detected.
F11
Temperature error detected.
F12
* The error code is basically an indication. Other components than the ones
indicated in this chart may be defective.
Cleaning
A vehicle that has been equipped with a Greensight system can be cleaned in a
car wash. When cleaning with a high-pressure washer, a spraying distance of at
least 1m from the camera and the metal sensor plates must be kept.
Obstructions and limitations
Dirt, snow or ice can affect the operation of the Greensight negatively. Objects
that are covered by snow may also affect the operation of the Greensight
negatively. In ambient temperatures of -25 °C and below, the system will no
longer function. The detection zone of >3 m behind the vehicle is less accurate.
F205424R02 9