Samson Concept288 Manual Del Proprietário página 16

Quick Start
Press the CH A SELECT button on the front of the
CR288 to choose an available channel for the CH
A reciver. The channel number will increase by one
digit, from 0-9 then A-F. Once the last channel has
been reached, the count will cycle back to 0.
Position the transmitter about 6-12" (15-30 cm) from the front of the CR288 with
the transmitter's IR window facing the IR transmitter on the front panel of the
CR288 receiver.
16
Press and hold the CR288 CH A SELECT button
to set the transmitter to the same channel as the
receiver via infrared transmission