Usb Port; Specifications - Bahco TEA003 Instrucciones Originales

4.11 USB Port

The USB port provides the power for the tester. The supplied USB lead can also be used to connect
the tester to a PC for communication of torque readings.
Connect the tester to the PC and a virtual com port will appear in device manager. This com port
should be selected and configured to suit the program being used to display the torque readings.
Torque readings will be sent to the PC whenever the RESET button is pressed in any mode and when
a peak value is reset (either manually using the RESET button in Dial or Click mode or when auto-
reset triggers in Click mode).
If the PC doesn't detect the tester correctly (e.g. if running Windows 7 rather than Windows 10)
download the USB driver from the SNA Europe ASC extranet website.
The USB port can also be used to update the tester software.
For the USB driver and to update the tester software contact Bahco or the closest distributor.

5. SPECIFICATIONS

Part Number Model
TEA003 TORQUE TESTER 3 N·m
TEA010 TORQUE TESTER 10 N·m
TEA030 TORQUE TESTER 30 N·m
Part
Number
A B
TEA003 175 63,5
TEA010 175 63,5
TEA030 175 63,5
Part Number Model
TEA065 TORQUE TESTER 65 N·m
TEA350 TORQUE TESTER 350 N·m
TEA1100 TORQUE TESTER 1.100 N·m
TEA2100 TORQUE TESTER 2.100 N·m
Transducer Input
¼" Male Hex Drive
¼" Male Hex Drive
10 mm Male Hex Drive
Dimensions (mm)
C D E
63,5 37,5 30
63,5 37,5 30
63,5 37,5 30
Inbuilt Transducer Connector
" Female Square Drive
3 8
½" Female Square Drive
27 mm Male Hex Drive
27 mm Male Hex Drive
Capacity
0.1 - 3 N·m
0.5 - 10 N·m
1.5 - 30 N·m
F G ØH
8,5 55 6,5
8,5 55 6,5
8,5 55 6,5
Max Torque
3.6 N·m
12 N·m
36 N·m
Weight
(kg)
J K
10 10 1,4
10 10 1,4
10 10 1,4
Capacity
3 - 65 Nm
10 - 350 N·m
50 - 1.100 N·m
200 - 2.100 N·m
9