36" GAS RANGE INSTALLATION INSTRUCTIONS
9. When installation is complete, connect the
power cord and set the time of day on the
electronic oven control as explained in the
Owner's Guide.
10. Verify the operation of the electronic
control functions as per instructions given in
the Owner's Guide.
11. Make sure the air flow from the oven
vent and the air flow to the bottom front of
range is unobstructed.
When All Hookups are Complete
Make sure all controls are left in the OFF position.
NOTE: Refer to Owner's Guide for complete instructions for
ordering parts or making inquiries about this range.
NOTE: Refer to Owner's Guide for operating instructions
and cleaning instructions.
Important: See next page for Anti-tip
Bracket Installation Instructions.
Model and Serial Number Location
The model and serial plate is located in the left hand
side, underneath the surface cooktop.
When ordering parts for or making inquires about your
range, always be sure to include the model and serial
numbers and a lot number or letter from the serial plate
of your range.
Your serial plate also tells you the rating of the burners
and type of fuel and the pressure the range was adjusted
for when it left the factory.
Before You Call for Service
Read the Avoid Service Checklist and operating
instructions in your Use and Care Guide.
Check to make sure the house fuse or circuit breaker for
your cooktop are not blown or open.
8