Panphonics Sound Shower AA-160 Basic Guia De Inicio Rapido página 4

4. TROUBLESHOOTING
If the sound cannot be heard,
Make sure that the Power Supply is connected to the amplifier and the power
•
switch is turned ON (Green LED stays on)
Make sure that the amplifiers volume level is not at its minimum level. If Red
•
LED turns on
Make sure that all the cables have been connected correctly and the media
•
player is turned on and it is functioning properly. If the media player has it´s
own volume control, make sure the volume has been set at sufficient level
If the sound volume is too low,
Makes sure that the media player's volume level is set higher (still adjusting
•
the amplifier's volume level to an appropriate level, so that Red LED does
not turn on)
Please note that the media player's output capacity affects the amplifier's
•
final audio output
5. SPECIFICATIONS
Electrical Properties
External Power Supply
Input impedance, RCA
Input voltage, RCA
Rated Output
S/N Ratio
THD
Audio Properties
Output Frequency
Operational Conditions
Temperature Range
IP Class
Physical/Weight
AA-160 Dimensions
(HxWxD)
AA-160 Weight (net)
Colour
160 V rms (135 nF load)
< 0.05 @ 75% Rated Output
min. 250 Hz – 16 kHz
0°C - 40°C (32°F - 72°F)
IP20
48 mm x 161 mm x 163 mm (1.89" x 6.34" x 6.42")
Anodized Aluminium
+24 V DC, 2.5 A
10 kOhm
0.9 Vp-p
> 70 dB
0.8 kg (1.8 lbs)