Publicidad
Idiomas disponibles
Idiomas disponibles
• Keep hands, hair and clothing away from contact with rollers.
• Do not contact the blade of the dies.
Before sliding product into the rollers, observe the caution
and warning labels printed on your Vagabond Machine.
Before sending product through the Vagabond Machine, it is important
to ensure that the Platform, Cutting Pads and die, or the "sandwich," is
aligned properly.
To align the "sandwich," press the Guide Flaps inward until they both
make contact with the "sandwich" with enough force to move them into
alignment before entering the rollers. Once the "sandwich" is aligned, you
may proceed to slide it into the roller opening and depress the motor
on/off button. Aligning the "sandwich" will prevent binding as it passes
through the rollers.
Sandwich/Platform Alignment
Publicidad
