How To Operate - Nostalgia Electrics ICM700 Instrucciones Y Recetas

HOW TO OPERATE

1. First, find a stable surface near an electrical outlet before starting. Make sure the cord
is away from any water source. It is acceptable to use an extension cord if needed.
2. Chill Freezer Bowl by wrapping it in a plastic bag and then placing in a freezer.
It should take about 12 hours to adequately freeze the Freezer Bowl.
3. To confirm that the Freezer Bowl is frozen enough to begin making ice cream,
shake it slightly after freezing. If you hear liquid moving inside of the Freezer Bowl,
it has not frozen enough. DO NOT shake the Freezer Bowl too hard or drop the
Freezer Bowl, as this could damage it and prevent it from freezing properly.
4. Choose your favorite recipe and prepare ice cream mixture per recipe instructions.
Chill the mixture for at least one hour before making ice cream.
5. Pour chilled ice cream mixture through the Ingredient Window into
the chilled Freezer Bowl. Make sure that you do not fill the bowl more
than ²/ full, as the mixture will expand during freezing process.
3
6. Plug the power cord attached to the Motor Housing into an outlet.
7. Turn on the Motor Housing by flipping switch to the "ON" position.
8. The mixing will begin.
9. In about 20 to 40 minutes the ice cream should be ready. The time needed
to finish a recipe may vary slightly depending on the ingredients used.
DO NOT operate the Ice Cream Maker for more than 40 minutes.
10. DO NOT over-mix the ice cream, as this can cause the ice cream to become too thick,
resulting in the motor stopping. If the motor stops, flip the switch to the "OFF" position,
unplug the unit, and remove the Cover and Motor Housing from the Freezer bowl by
rotating the Cover counter-clockwise. Allow ice cream to soften slightly, then serve.
11. Note that your ELECTRIC ICE CREAM MAKER has a safety feature that prevents the electric
motor from overheating. If ice cream becomes too thick or if the electric motor runs for too
long, the electric motor will stop automatically. If this happens, flip switch to "OFF" position
and allow electric motor to cool down before continuing the ice cream making process.
12. After you have finished making ice cream and flipped switch to "OFF"
position, unplug the unit, and remove the Cover and Motor Housing
from the Freezer bowl by rotating the Cover counter-clockwise.
13. Remove the Dasher from the Motor Housing and scrape off excess ice cream with a spatula.
14. Transfer ice cream to a freezer-safe container and freeze,
or serve straight from the Freezer Bowl.
6