Publicidad
Idiomas disponibles
Idiomas disponibles
Optional Monitoring Software Installation (For Windows OS)
1. Insert the included installation CD into CD-ROM or go to the website
http://www.power-software-download.com drive and then follow the
on-screen instructions. If there no screen shows when inserting the CD after 1
EN
minute, please execute setup.exe for initiating installation software.
2. Follow the on-screen instructions to install the software.
3. When your computer restarts, the monitoring software will appear as an orange
plug icon located in the system tray, near the clock.
Trouble Shooting
Problem
No words display
on the front panel.
Unit always on
battery mode
When power
failure, back-up
time is shorten.
Possible Cause
Battery voltage is too low Charge the UPS unit up to
Battery failure.
Power cord loose
Circuit breaker protected.
AC utility is too high or too
low, or there is a blackout
Overload of the UPS.
Battery voltage is too low. Charge battery 4 hours or
Battery defect due to high
temperature operation
environment, or improper
operation to battery.
4 hours.
Replace with the same type
of battery.
Re-plug the power cord.
Press the breaker.
Normal condition
Remove some noncritical
load.
more.
Replace with the same type
of battery.
5
Solutions
Publicidad
