English; Introduction; Safety Information - pico Technology PicoScope 4000 Serie Guia De Inicio Rapido

Quick Start Guide
1

English

1.1

Introduction

Thank you for purchasing a PicoScope 4444 differential PC oscilloscope, a highly
flexible differential oscilloscope suitable for a wide range of voltage measurement
applications.
This guide explains how to install the PicoScope software and connect and set
up your oscilloscope. For further information on the software, please refer to the
PicoScope 6 User's Guide; for technical data relating to the oscilloscope itself, see
the PicoScope 4444 Data Sheet: both are included as PDF files on the software disk
and are available for download from www.picotech.com/downloads. You can
also access the PicoScope 6 User's Guide from the Help menu within the PicoScope
software.
1.2

Safety information

To prevent possible electrical shock, fire, personal injury, or damage to the product,
carefully read this safety information before attempting to install or use the
product. In addition, follow all generally accepted safety practices and procedures
for working with and near electricity.
The product has been designed and tested in accordance with the European
standard publication EN 61010-1:2010, and left the factory in a safe condition. The
following safety descriptions are found throughout this guide:
A WARNING identifies conditions or practices that could result in injury or death.
A CAUTION identifies conditions or practices that could result in damage to the
product or the equipment to which it is connected.
1.2.1 Symbols
These safety and electrical symbols may appear on the product or in this guide.
Symbols Description
Direct current
Alternating current
Earth (ground) terminal
Frame or chassis terminal
DO282-2
The terminal can be used to
make a measurement ground
connection. The terminal is NOT a
safety or protective earth.
Copyright © 2017 Pico Technology Ltd. All rights reserved.
PicoScope 4444 High-Resolution Differential Oscilloscope
Equipment protected
throughout by double insulation
or reinforced insulation
Caution, possibility of electric
shock
Caution
Static awareness
EN 61010 overvoltage category
Do not dispose of this product
as unsorted municipal waste
WARNING
To prevent injury or death, use the product only as instructed and
use only the accessories that have been supplied or recommended.
Protection provided by the product may be impaired if used in a manner
not specified by the manufacturer.
1.2.2 Maximum input ranges
Observe all terminal ratings and warnings marked on the product.
The full-scale measurement range is the maximum voltage that the PicoScope 4444
can accurately measure. The common-mode range is the maximum voltage that
can be applied to both differential inputs with respect to the the scope chassis or
ground. The overvoltage protection range is the maximum voltage that can be
applied without damaging the instrument.
Input range
Full-scale
measurement
Common-mode
WARNING
To prevent electric shock, do not attempt to measure voltages outside
the specified full-scale measurement or common-mode ranges above.
Appearance on the product
indicates a need to read these
safety and operation instructions
Static discharge can damage parts
Overvoltage protection
±50 V ±100 V DC + AC peak
±50 V ±100 V DC + AC peak
1