Handling Electrical Cables; Target Group; Scope Of Delivery; Intended Use - Waeco Mobitronic CoolAir 8100-012VS Instrucciones De Instalación

CA-DC.book Seite 10 Donnerstag, 8. September 2005 9:23 09

Target group

1.2

Handling electrical cables

Use cable ducts to lay cables through walls with sharp edges.
Do not lay loose or bent cables next to electrically conductive materials
(metal).
Do not pull on the cables.
Attach and lay the cables in such a manner that they cannot be tripped
over or damaged.
The electrical power supply may only be connected by a qualified
electrician (e.g. VDE 0100, Part 721 in Germany).
2 Target group
The installation information in this manual is intended for qualified personnel
at workshops who are familiar with the guidelines and safety precautions to
be applied during the installation of vehicle accessory parts.
3

Scope of delivery

Quantity Description
1 Inverter
1 Charging current distributor ECL-75
1 Sensing cable
1 Installation manual
Before starting the device, check if all of the parts belonging to the scope of
delivery are present.
4

Intended use

The CA-DC upgrade kit is suitable for equipping the CA-1000-AC roof air
conditioner for use while driving.
The operating noises made by the roof air condi-tioner are louder
during mobile air conditioning than during stationary air conditio-
ning. The noises are caused by using the inverter.
10
Item number
8100-012VS
4441300084
4445100162
CoolAir