Troubleshooting - Beko RCSA270K30XP Instrucciones Para El Uso

EN
Information concerning the noise and
the vibrations which might appear
during the operation of the appliance
1. The operation noise can increase during the
operation.
- In order to keep the temperatures at the
adjusted temperatures, the compressor of the
appliance starts periodically. The noise
produced by the compressor becomes stronger
when it starts and a click can be heard when it
stops.
- The performance and operation features of the
appliance can change according to the
modifications of the temperature of the ambient
environment. They must be considered as
normal.
2. Noises like liquids flowing or as being sprayed
- These noises are caused by the flow of the
refrigerant in the circuit of the appliance and
comply with the operation principle of the
appliance.
3. Other vibrations and noises.
- The level of noise and vibrations can be caused
by the type and the aspect of the floor on which
the appliance is placed. Make sure that the floor
does not have significant level distortions or if it
can yield to the weight of the appliance (it is
flexible).
The symbol
household waste. Instead it shall be handed over to the applicable collection point for the recycling
of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will
help prevent potential negatyve consequences for the environment and humann health, which
could otherwise be otherwise be caused by inappropriate waste handling of this product. For more
detailed information about recycling of this product, please contact your local city office, you
household waste disposal service or the shop where you purchased the product.
on the product or on packaging indicates that this product may not be treated as
- Another source of noise and vibrations is
represented by the objects placed on the
appliance. These objects must be removed from
the appliance
- The bottles and the vessels placed in the
refrigerator touching each other. In such cases
move the bottles and the vessels so that there is
a small distance between them.

Troubleshooting

If the appliance does not operate when switched
on, check;
• That the plug is inserted properly in the socket
and that the power supply is on. (To check the
power supply to the socket, plug in another
appliance).
• Whether the fuse has blown/circuit breaker has
tripped/main distribution switch has been turned
off.
• That the temperature control has been set
correctly.
• That the new plug is wired correctly, if you have
changed the fitted, moulded plug.
If the appliance is still not operating at all after
above checks, contact the dealer from whom you
purchased the unit.
Please ensure that above checks have been
done, as a charge will be made if no fault is found.
46
Instruction for use