Troubleshooting - Beko BBBF2410 Manual Del Usuario

Ocultar thumbs Ver también para BBBF2410:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

7

Troubleshooting

Check this list before contacting the
service. Doing so will save you time
and money. This list includes frequent
complaints that are not related to
faulty workmanship or materials.
Certain features mentioned herein
may not apply to your product.
The refrigerator is not working.
The power plug is not fully settled. >>>
Plug it in to settle completely into the
socket.
The fuse connected to the socket
powering the product or the main fuse is
blown. >>> Check the fuses.
Condensation on the side wall of
the cooler compartment (MULTI
ZONE, COOL, CONTROL and FLEXI
ZONE).
The door is opened too frequently >>>
Take care not to open the product's door
too frequently.
The environment is too humid. >>>
Do not install the product in humid
environments.
Foods containing liquids are kept in
unsealed holders. >>> Keep the foods
containing liquids in sealed holders.
The product's door is left open. >>> Do
not keep the product's door open for
long periods.
The thermostat is set to too low
temperature. >>> Set the thermostat to
appropriate temperature.
Compressor is not working.
In case of sudden power failure or pulling
the power plug off and putting back on,
the gas pressure in the product's cooling
system is not balanced, which triggers
the compressor thermic safeguard. The
product will restart after approximately
6 minutes. If the product does not
restart after this period, contact the
service.
Defrosting is active. >>> This is normal
for a fully-automatic defrosting product.
The defrosting is carried out periodically.
The product is not plugged in. >>> Make
sure the power cord is plugged in.
The temperature setting is incorrect.
>>> Select the appropriate temperature
setting.
The power is out. >>> The product will
continue to operate normally once the
power is restored.
The refrigerator's operating noise
is increasing while in use.
The product's operating performance
may vary depending on the ambient
temperature variations. This is normal
and not a malfunction.
The refrigerator runs too often or
for too long.
The new product may be larger than the
previous one. Larger products will run for
longer periods.
The room temperature may be high.
>>> The product will normally run for
long periods in higher room temperature.
The product may have been recently
plugged in or a new food item is placed
inside. >>> The product will take longer
to reach the set temperature when
recently plugged in or a new food item is
placed inside. This is normal.
Large quantities of hot food may have
been recently placed into the product.
>>> Do not place hot food into the
product.
The doors were opened frequently or
kept open for long periods. >>> The
warm air moving inside will cause the
product to run longer. Do not open the
doors too frequently.
The freezer or cooler door may be ajar.
>>> Check that the doors are fully
closed.
18
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido