Product Description; Safety Information - BGS technic 2850 Manual De Instrucciones

SPECIFICATIONS
Max. Seat Capacity: 130 Kg
Max. Creeper Capacity: 150 Kg
Dimensions:1060 x 450 x 150 mm
Frame Material: Coated steel
Number of Casters: 6 pcs.

PRODUCT DESCRIPTION

This device is designed to be use as a mechanics seat or for use as a mechanics creeper. It is
intended to be used to support and move, along a smooth and level surface, rated capacity loads
consisting of a single person weighing no more than shown under Specifications for the purpose of
performing automotive maintenance or service. This device is not intended, designed or engineered
to be used for any other purpose.

SAFETY INFORMATION

For your safety, read, understand and follow all information in this manual.
Do not use if there are broken, bent, cracked or damaged parts.
Any folding creeper that appears damaged in any way, or operates abnormally shall be removed from
service immediately.
If the folding creeper has been subjected to a shock load (a load dropped suddenly, unexpectedly
upon it), immediately discontinue use until it has been inspected by an authorized personal.
It is recommended that an annual inspection be done by qualified personnel.
Only use this device for purpose that is described under "Product Description".
WARNING To avoid personal injury and property damage:
•
Read, understand, and follow all printed materials provided with and on this product before use.
•
Do not exceed rated capacity (includes person, tools, equipment, personal items) ! Rated capacity
is shown in specifications
•
Sit down gently! Avoid shock loads caused by jumping or falling onto seat.
•
Do not stand on seat.
•
Beware of pinch and crush hazards when folding and unfolding.
•
Keep out of the reach of children! This device is not appropriate for children's use.
•
Use on smooth, level surfaces only.
ASSEMBLY INSTRUCTIONS (see Figure 1)
1. Carefully unfold the creeper as seen in Fig. 1. Note: Keep hands away from pinch and crush
points that are created while folding and unfolding !
2. Use a suitable open-end wrench to attach the head frame casters to Head Frame. Hand tighten
with open end wrench.
3. Use a 5 mm hex-key to attach the remaining casters to the Rear Frame. Insert the threaded
fasteners from above, the casters from below (as seen in Fig. 1), then hand tighten with hex key.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Foldable Mechanics Creeper / Seat
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 2850
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed