Preparations At The Workplace; Inserting The Battery - Hilti TE 300-A36 Manual De Instrucciones

Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise information
Sound power level (L )
WA
Uncertainty (K )
WA
Sound pressure level (L,
Uncertainty (K )
pA
Information about vibration
Chiseling (a )
h, Cheq
Uncertainty
4.3 Battery
Battery operating voltage
Ambient temperature
Storage temperature
5

Preparations at the workplace

CAUTION
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.1 Charging the battery
1. Before charging the battery, read the operating instructions for the charger.
2. Make sure that the contacts on the battery and the contacts on the charger are clean and dry.
3. Use an approved charger to charge the battery.
5.2

Inserting the battery

CAUTION
Risk of injury by short circuit or falling battery!
▶ Before inserting the battery, make sure that the contacts on the battery and the contacts on the product
are free of foreign matter.
▶ Make sure that the battery always engages correctly.
1. Charge the battery fully before using it for the first time.
2. Push the battery into the battery holder until it engages with an audible click.
3. Check that the battery is seated securely.
5.3 Removing the battery
1. Press the release buttons on the battery.
2. Pull the battery out of its holder in the device.
16 English
Printed: 13.05.2019 | Doc-Nr: PUB / 5434239 / 000 / 01
)
pA
TE 300­A36
99 dB
3 dB(A)
88 dB
3 dB(A)
TE 300­A36
7.9 m/s²
1.5 m/s²
36 V
−17 ℃ ... 60 ℃
−20 ℃ ... 40 ℃
2201961
*2201961*