Orbegozo DS 75XXX BL.N Manual De Instrucciones página 14

DS 75XXX BL.N / DS 80XXX BL.N
- Hang the hood on wall bracket and screw it to the wall through the 4 holes drilled before.
- Fix reducer to the hood. Then place the extraction's tube in the reducer as below picture shows.
- Assembly of outter chimney: outter chimney is assembled with two provided plates, one plane and
other in "U". Put top chimney in bottom chimney and screw plane plate in bottom chimney as it is
shown in below picture.
- Installation of chimney: put it on the hood and screw it to the flanges which are on top side of hood.
14