T. Squeeze the fold button on the handle bar and fold the frame forward. Pull up on the "Pull to Fold"
folding handle and let the frame colapse.
U. Folding handle to seat and let the frame colapse.
V. Make sure the auto-lock lever clicks into place.
OPTION
BUMPER BAR
W.The bumper bar can be opened on one side or completely removed; to open it, pull the lever and
remove it from its housing. To remove it, repeat the operation on the other side as well.
Warning: never attach the bumper bar in the direction opposite the one shown.
CANOPY
X. Remove canopy by press the buttons in the frame joint.
REMOVE SEAT
Y. Unsnap the seat fabric from the seat frame on both sides.
Y-1.From the underside of the seat, unfasten the hook-and-loop and slide the strap through the D-ring.
Y-2. Remove the "Pull to Fold" folding handle from the frame by unfastening the triangle carabiner hooks
and slide the straps through the seat.
Y-3. Remove the foot rest cover.
Y-4. Pull the seat fabric out of the channels in the frame.
Y-5. Remove harness from the seat.
Y-6. Remove the back board & the foot rest board.
INSTALL SEAT
Z. Reverse the way of remove the seat.
CARE AND MAINTENANCE
To preserve the longevity of your stroller, it is important to perform simple, regular maintenance. From
time to time, make sure that the joints and folding areas are still in good condition. If you hear any
squeaking or feel tension, you can take your stroller to a local bike shop for added lubrication.
All repairs should only be carried out by an authorized dealer.
WASHING
Seat Fabric
• You can machine wash your stroller's seat in cold water with a mild detergent.
• Be sure to remove the metal frame, safety harness, and PE boards from the seat before washing.
• Do not use solvents, caustic or abrasive cleaning materials.
• To minimize shrinkage, simply reattach the seat to the frame to dry.
• Do not press, iron, dry clean, tumble dry or wring the fabric.
• If the seat covers need to be replaced, only use parts from a Elodie Details Authorized Dealer. They are
the only ones that are guaranteed to have been safety tested and designed to fit this seat.
Plastic/Metal Parts
• Wipe clean using a mild soap and warm water.
• You must not remove, dismantle or alter any part of the seat folding mechanism or brakes.
13